DCS Aborted By User

Hva betyr aborted by ENTER ?

The Door Check Sequence (DCS) was intentionally terminated by the user pressing the ENTER key on the GAA21750AK3 service tool. This is a user-initiated action and not an equipment malfunction, but it prevents the completion of the safety sequence for the OTIS 2000 Controllers MCS120/MCS220.

• Operator manually pressed the ENTER key to interrupt the ongoing Door Check Sequence.
• This may occur during troubleshooting, testing, or due to an oversight.

Klikk på steg for å spore fremgangen.

1. 1

   Confirm if the DCS was intended to be aborted.

2. 2

   If a complete Door Check Sequence is required for normal elevator operation, restart the sequence from the service tool menu (SETUP > DCS Run).

3. 3

   Review operational procedures for DCS execution to prevent accidental termination.