Speed Monitoring Fault

Hva betyr 08 ?

This fault indicates that the internal speed monitoring function has detected a condition where the actual speed deviates significantly from the commanded speed, typically due to excessive load. This fault occurs only when DIP switch S2/4 is set to 'ON', and can cause the motor to stall or operate outside its designed parameters.

• High load on the drive exceeding its operational capacity.
• DIP switch S2/4 is set to 'ON' and speed monitoring has triggered.

Klikk på steg for å spore fremgangen.

1. 1

   Reduce the mechanical load on the drive.

2. 2

   Verify DIP switch S2/4 is correctly set if speed monitoring is intended to be active.

3. 3

   Reset the fault by switching off and then switching on the DC 24V supply voltage.

4. 4

   Reset the error via the error reset function.