Encoder not connected, defective encoder, defective encoder cable

Hva betyr F14-0 ?

The encoder or its cable is either not connected correctly, has a short circuit or broken wire, or the encoder unit itself is defective. It may also occur if 2 inverters are connected via X14 and P505 is set to YES, causing SubC 27.

• Encoder is not physically connected to the device.
• Encoder cable is damaged or has a broken connection.
• The encoder itself is defective and not functioning.
• Incorrect encoder type selected in configuration.

Klikk på steg for å spore fremgangen.

1. 1

   Check encoder cable and shield for correct connection, short circuit and broken wire.