BOP contents incompatible

Hva betyr F00058 ?

An attempt was made to clone parameters using a Basic Operator Panel (BOP) that contains parameters created on a different type of drive. This incompatibility prevents successful parameter transfer, as the configurations are not designed for the current drive, leading to configuration errors.

• The BOP contains parameters from a different drive model or series (e.g., cloning parameters from a G120 to a G130 drive).
• Firmware version mismatch between the drive and the BOP (e.g., older BOP firmware on a newer drive).
• Parameter set created for a different power size or configuration of the same drive series.
• Attempting to clone parameters with specific hardware features not present in the target drive (e.g., different I/O configuration).
• Corruption of the parameter file on the BOP, leading to an incorrect drive type identification.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the BOP's part number and the drive's model number to ensure they are compatible for parameter transfer.

2. 2

   Check the firmware versions of both the drive and the BOP; update firmware if a known compatibility issue exists.

3. 3

   Perform a factory reset of the BOP to clear its incompatible contents, then attempt to clone from the drive (if the drive has a valid configuration).

4. 4

   Instead of cloning, try to manually input essential parameters into the drive if the BOP can still function as an interface.

5. 5

   If parameters are being loaded from an external source (e.g., SD card, PC), ensure the parameter file matches the target drive's exact model and configuration.