Charging Switch Open

Hva betyr 5 ?

The charging switch is detected as open despite a START command being issued to the drive. This indicates either a malfunction in the charging switch control mechanism or a failure of the component itself.

• Charging contactor failing to close when commanded.
• Loss of control signal to the charging relay.
• Mechanical obstruction preventing contactor closure.
• Overload on the charging circuit.

Klikk på steg for å spore fremgangen.

1. 1

   Reset the fault using the Reset button on the control keypad or via the I/O terminal.

2. 2

   Attempt to restart the drive. If the fault re-occurs, further investigation into internal component failure or control logic is warranted.