Self-diagnosis Fault of Option Board

Hva betyr CPF21 ?

A self-diagnosis fault was detected on the option board, potentially due to noise or spikes on the communication line or a defective option board itself. This indicates an internal issue with the option board's CPU, impacting its operation.

• Excessive electrical noise or transient voltage spikes on the communication bus connected to the option board.
• Internal hardware malfunction or component degradation within the option board itself, preventing self-diagnosis.
• Incorrect or unstable power supply voltage (e.g., 24VDC) for the option board due to external PSU issues.
• Firmware corruption on the option board or an incompatibility with the Drive's main firmware.

Klikk på steg for å spore fremgangen.

1. 1

   Measure the voltage on the option board's power supply terminals (e.g., 24VDC) using a multimeter to confirm it is within specified tolerance.

2. 2

   Verify the integrity of communication cables connected to the option board, checking for proper shielding connection and absence of breaks.

3. 3

   Isolate the option board by powering down, removing, and then re-inserting it firmly to ensure proper seating in its slot.

4. 4

   Update the Drive's firmware to the latest available version, which may include specific option board firmware updates.

5. 5

   Temporarily swap the suspected option board with a known good, compatible board to verify if the fault follows the board.