Comparator 1 Limit Error

Hva betyr CP1 ?

This fault activates when the monitored value, selected in H2-20 [Comparator 1 Monitor Selection], falls within the predefined range set by H2-21 [Comparator 1 Lower Limit] and H2-22 [Comparator 1 Upper Limit]. It signals that a critical process variable has entered a restricted operating window, indicating an abnormal condition that requires immediate investigation to prevent operational issues.

• The process variable monitored by H2-20 (Comparator 1 Monitor Selection) has entered its critical operating range.
• H2-21 (Comparator 1 Lower Limit) or H2-22 (Comparator 1 Upper Limit) are set too broadly or too narrowly.
• The sensor providing the input for the monitored parameter is faulty or provides an incorrect reading.
• Normal process fluctuations temporarily pushing the monitored value into the defined range.
• External control system or PLC logic issue that maintains the monitored value within the fault range.

Klikk på steg for å spore fremgangen.

1. 1

   Identify the parameter selected by H2-20 (e.g., U1-01, U1-03) and monitor its real-time value.

2. 2

   Verify H2-21 (Comparator 1 Lower Limit) and H2-22 (Comparator 1 Upper Limit) accurately define the desired fault window.

3. 3

   Calibrate or replace the sensor connected to the analog input channel corresponding to H2-20.

4. 4

   Observe the monitored process variable during normal operation to confirm its expected range.

5. 5

   Adjust H2-21 and H2-22 to reflect the actual acceptable operating limits for the application.