I2 Flash Failed

What does 10237 mean?

An attempt to flash the FPGA configuration device on port 2 has failed. This indicates a problem with the firmware update process, potentially leaving the device in an inoperable state.

Complete Troubleshooting Guide

1. 1

   Verify the correct firmware file is being used for the FPGA configuration and that it is not corrupted.

2. 2

   Ensure the flashing tool or software is up-to-date, properly connected, and correctly configured for the device.

3. 3

   Check for a stable and uninterrupted power supply to the drive during the entire flashing process.

4. 4

   Attempt to reflash the FPGA configuration device following the manufacturer's recommended procedure carefully.

5. 5

   If the fault persists, consider that the control board may have internal damage and require replacement.