Position Coder Disconnected

Was bedeutet SP0027 ?

The position coder (encoder) feedback cable is disconnected or the sensor is faulty. This results in loss of position feedback, making position control impossible.

• Position encoder cable is physically disconnected.
• Encoder signal lines are damaged.
• The encoder itself has failed.
• Incorrect encoder type configured in CNC.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check physical connection of the encoder cable at both the motor and the amplifier.

2. 2

   Measure encoder signal integrity (e.g., A, B, Z pulses) at amplifier terminals.

3. 3

   Verify encoder resolution and type settings in CNC parameter P4-XX.

4. 4

   Test encoder output using an oscilloscope if possible.