RSD Self-test Failed

Was bedeutet RsdSelftest Failed ?

The automatic self-test for the Rapid Shutdown (RSD) function has failed. This self-test specifically monitors the discharge circuit of the RSD function and is performed during each startup procedure, prior to connection to the public grid, when DC voltage exceeds 40V.

• Malfunction or fault within the RSD discharge circuit.
• Insufficient DC voltage (below 40V) to properly initiate the self-test.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Perform a manual self-test by initiating an interruption in the grid connection (e.g., trip the AC breaker) or by activating the WSD trigger device.

2. 2

   Measure and verify the discharge of the PV module terminals using a multimeter to confirm proper operation of the RSD discharge circuit.