Hardware reset of digital signal processor

What does 1792 mean?

The digital signal processor (DSP) has undergone an unexpected hardware reset. This could be due to a transient power issue, an internal watchdog timer, or a deeper hardware malfunction.

• Brief sag or interruption of the internal 3.3VDC or 5VDC power supply rail to the Digital Signal Processor (DSP).
• Exceeding the DSP's operational temperature limits due to inadequate cooling or high ambient conditions.
• Internal watchdog timer expiration triggered by a critical software deadlock or an infinite loop.
• Electromagnetic interference (EMI) ingress affecting the DSP clock or critical data lines.
• Component failure (e.g., crystal oscillator, decoupling capacitor) associated with the DSP circuit.

Click steps to track your progress.

1. 1

   Verify the stability of the 24VDC, 5VDC, and 3.3VDC internal power supply rails at the DSP test points using an oscilloscope.

2. 2

   Check the drive's internal fan operation and ensure heatsinks are free of dust or obstructions.

3. 3

   Inspect for loose connections on the main control board and any DSP daughter cards.

4. 4

   Measure the ambient temperature within the control cabinet to confirm it is within specified limits (e.g., 0-50°C).

5. 5

   Isolate potential sources of EMI by checking grounding connections and ensuring proper cable routing.