Amplifier overtemp. shutdown

What does F218 mean?

The DIAX04 SSE-03VRS drive's internal temperature sensor has detected an excessive temperature, leading to a shutdown to prevent damage. This usually indicates inadequate cooling or sustained operation beyond the drive's thermal limits. Continued operation in this state can permanently damage the power components.

• Ambient temperature around the DIAX04 SSE-03VRS is too high.
• Cooling fan on the DIAX04 SSE-03VRS is blocked, dirty, or faulty.
• Heat sink fins on the drive are clogged with dust or debris, impairing heat dissipation.
• Drive is undersized for the application, leading to sustained overcurrent and excessive heat generation.
• Improper installation, such as insufficient clearance for airflow in the control cabinet.

Click steps to track your progress.

1. 1

   Allow the DIAX04 SSE-03VRS drive to cool down. Do not attempt to reset until the temperature has normalized.

2. 2

   Inspect the cooling fan on the drive for proper operation and ensure it is free from obstructions and dust.

3. 3

   Clean the heat sink fins of the DIAX04 SSE-03VRS to remove any accumulated dust or debris.

4. 4

   Verify the ambient temperature in the control cabinet is within the specified operating range for the DIAX04 SSE-03VRS.

5. 5

   Check the drive loading by monitoring motor current and duty cycle to ensure it is not consistently exceeding its rated capacity. Consider resizing if necessary.