Immediate Stop

What does 13 mean?

This error occurs when the +24 Vdc signal is applied to the CLM01.3-M's Immediate Stop input (connector X3, pin 5). This input is designed to command an immediate halt to machine operation for safety purposes.

• The Immediate Stop pushbutton on the machine has been pressed, activating the input.
• Faulty wiring or a short circuit is causing a continuous +24 Vdc signal to be present at connector X3, pin 5.
• A malfunctioning Immediate Stop pushbutton is physically stuck or electrically shorted.
• External control logic or device inadvertently activating the Immediate Stop input.

Click steps to track your progress.

1. 1

   Verify that the Immediate Stop pushbutton is not currently pressed or stuck in an actuated position.

2. 2

   Consult the machine builder's wiring diagrams to understand how the Immediate Stop input (X3, pin 5) is integrated into the flying cutoff system.

3. 3

   Check the wiring at CLM01.3-M connector X3, pin 5 for any loose connections, shorts to +24 Vdc, or damage.

4. 4

   Inspect the Immediate Stop pushbutton for mechanical damage or wear that could cause it to stick.

5. 5

   If external control is involved, verify the output signal from the controlling device that feeds the Immediate Stop input.