RS Block # Wrong

What does RS 01 mean?

This serial communication error occurs when the program command transmitted to the CLM01.3-M contains an invalid program block number. The block number sent via serial interface must be between 000 and 999.

• The program block number in the serial command string is outside the valid range of 000-999.
• Typographical error in the block number within the transmitted serial command.
• Corrupted data transmission over the serial interface.
• Sending device software bug generating incorrect block numbers.

Click steps to track your progress.

1. 1

   Verify that the program block number being transmitted is between 000 and 999. Refer to Chapter 7 (Serial Interface) for the correct command format.

2. 2

   Correct the program block number in the transmitted serial command to be within the valid range.

3. 3

   Check the serial communication link (RS-232/422/485) for noise, interference, or incorrect cabling that could corrupt data.

4. 4

   Re-transmit the program command after verifying the block number and overall command format.

5. 5

   Ensure the sending device's software generates program block numbers correctly according to the CLM01.3-M specifications.