Parameter Out of Range (Adv. Code 0)

What does 30 mean?

This fault indicates that a customer-defined parameter has been set to a value outside its permissible range. This can lead to unexpected drive behavior, incorrect motor control, or prevent proper operation. An invalid parameter can compromise system safety and performance.

• Manual entry of a parameter value exceeding its maximum or falling below its minimum allowed range (e.g., P2-10 Min Frequency set higher than P2-09 Max Frequency).
• A parameter value automatically calculated by another setting results in an invalid range for a dependent parameter.
• Attempting to write a value to a read-only parameter, or a parameter locked by a security setting (e.g., P7-01 Security Code).

Click steps to track your progress.

1. 1

   1. Identify the specific parameter flagged as out of range (usually displayed on the keypad or in the fault log).

2. 2

   2. Access the identified parameter and review its minimum and maximum permissible values as displayed on the keypad or in the user manual.

3. 3

   3. Adjust the parameter's value to be within its specified range, ensuring logical consistency with other related parameters.

4. 4

   4. If dependent parameters are involved, verify their settings and adjust as necessary to allow the target parameter to accept a valid value.

5. 5

   5. Save the new parameter settings and perform a power cycle on the drive.