Target position out of num. range

¿Qué significa E2064 ?

The commanded target position or the internal position calculation has exceeded the numerical range supported by the drive controller. This can happen with extremely large position values or incorrect scaling.

• Programmed target position exceeds the drive's internal numerical representation limits (e.g., 32-bit or 64-bit limits).
• Incorrect scaling factors or gear ratios leading to excessively large internal position values.
• Runaway or uncontrolled motion causing the actual position to exceed its numerical limits.
• Faulty encoder or position feedback generating erroneous large values.

Haga clic en los pasos para seguir su progreso.

1. 1

   Verify the commanded target position and application scaling factors to ensure they do not result in values exceeding the drive's numerical limits.

2. 2

   Check the position feedback system, including encoder cabling and scaling, for correct operation and accurate reporting.

3. 3

   Inspect the mechanical system for any uncontrolled motion or runaway conditions that could lead to extreme position values.

4. 4

   If using a modulo axis, verify the modulo value and ensure it is configured correctly.