External power supply X10 error

¿Qué significa F2033 ?

An error has occurred with the external 24VDC power supply connected to terminal X10 of the drive, which typically provides control power to the drive or external I/O.

• Loss of 24VDC supply voltage at terminal X10.
• Overload or short circuit on the 24VDC supply circuit connected to X10.
• Faulty external 24VDC power supply unit.
• Loose or incorrect wiring to terminal X10.

Haga clic en los pasos para seguir su progreso.

1. 1

   Measure the 24VDC supply voltage at terminal X10 and ensure it is present and stable.

2. 2

   Check for any short circuits or overloads on the 24VDC circuit connected to X10. Disconnect loads to isolate the problem.

3. 3

   Inspect the wiring to terminal X10 for loose connections, damage, or incorrect polarity.

4. 4

   Verify the external 24VDC power supply unit is functioning correctly and delivering the rated current.