CRC Communication Error (CNC-Spindle, 15i)

¿Qué significa SP0225 ?

A CRC (Cyclic Redundancy Check) communication error occurred during data exchange between the CNC and the serial spindle amplifier for Series 15i. This indicates data corruption or signal integrity issues in the communication link.

• Data corruption detected via CRC check during serial communication with the spindle.
• A faulty serial cable or connector causing bit errors.
• Electromagnetic interference corrupting the transmitted data.
• A problem within the spindle amplifier's communication interface.

Haga clic en los pasos para seguir su progreso.

1. 1

   Check the CRC checksum value reported in the error log.

2. 2

   Inspect the serial communication cable between the CNC and the spindle amplifier for damage.

3. 3

   Ensure proper shielding and grounding of the serial communication lines.

4. 4

   Swap the serial cable with a known good cable.