Battery Overvoltage in I2 Phase

¿Qué significa 33 ?

The battery voltage exceeded its safe limit while the charger was operating in the I2 (secondary constant current) charging phase. This indicates a problem with the charger's voltage regulation or an issue with the battery itself during this critical charging stage.

• A malfunction in the charger's voltage regulation circuit specifically during the I2 phase, allowing the voltage to rise too high.
• Battery cells becoming overcharged or experiencing premature voltage rise due to internal imbalances or defects.
• An incorrectly configured I2 phase voltage limit in the charger's settings, set higher than the battery's safe maximum.

Haga clic en los pasos para seguir su progreso.

1. 1

   Disconnect the battery and measure its terminal voltage directly.

2. 2

   Verify that the charger's I2 phase voltage limit setting (parameter, if available) accurately matches the battery's specified maximum charging voltage.

3. 3

   Monitor the charger's output voltage and current during the I2 phase, if safely possible with diagnostic equipment, to observe regulation behavior.