Platform Load is over 90%

What does 90 mean?

The detected load on the platform exceeds 90% of its rated capacity. This is a warning only, indicating close proximity to the maximum load limit.

• Platform loaded very close to its maximum capacity.
• Malfunction of the platform overload sensor, providing an inaccurate reading.
• Temporary load spikes triggering the sensor.

Click steps to track your progress.

1. 1

   Verify load weighing system (LWS) calibration parameters in the Kone Kone Elevator Control system against the latest documentation and factory settings.

2. 2

   Inspect all load weighing device (LWD) sensors and their mounting hardware for physical damage, obstructions, or improper installation that could affect readings.

3. 3

   Inspect all wiring and connections from the load weighing device (LWD) sensors to the Kone Kone Elevator Control for signs of damage, corrosion, or looseness.

4. 4

   Observe elevator operation during typical load cycles and monitor the reported load value in the control system for consistency and accuracy, comparing with estimated actual loads.