CANBUS Failure

What does 08 mean?

This error indicates interference or a complete break in the CANBUS communication link. The error is recorded if communication with the car control PCB SM-02 fails incessantly for 4 seconds, pointing to a severe communication issue within the elevator's network.

• Electrical interference affecting the CANBUS communication lines.
• Missing or incorrectly connected resistor jumper on CANBUS terminals.
• Physical break or damage in the CANBUS communication wiring.
• Failure of the car control PCB SM-02 to communicate over the CANBUS.

Click steps to track your progress.

1. 1

   Inspect the entire CANBUS wiring for physical damage, loose connections, or breaks along the network segments.

2. 2

   Verify that the required resistor jumper is correctly installed on the CANBUS terminals as specified in the installation guidelines.

3. 3

   Check for sources of electrical interference near the CANBUS cables and implement appropriate shielding if necessary.

4. 4

   Monitor the communication status with the car control PCB SM-02 to confirm continuous signal loss for the specified 4 seconds.