NoLsrControl- ColdRun

Cold run selected

Kuka · LaserTech 3.1

What does NoLsrControl- ColdRun mean?

The program is currently executing without laser power, indicated by the 'Laser off' status key on the HMI. This state is intentionally selected, likely for dry runs, testing, or setup procedures.

Repair Steps

  1. 1

    Activate the laser power by pressing the 'Laser off' status key on the HMI or control panel.

Browse all codes in this manual (46)
Verified technical data. Last updated: March 2026
Source: Kuka LaserTech 3.1
Open Manual (Page 77)Search more codes in this manual