Fieldbus Motor Phase Failure (Warning)

What does 182 mean?

The drive has detected a motor phase failure and issued a Warning, indicated via the fieldbus interface. This means one or more motor phases are inactive or drawing insufficient current, but the drive may still be operating or preparing to trip. It requires prompt attention to prevent potential motor or drive damage if the condition persists.

Complete Troubleshooting Guide

1. 1

   Check all motor cables for damage, loose connections, or open circuits.

2. 2

   Verify the 'V min' setting to ensure it is correctly configured for the motor.

3. 3

   Confirm the motor is connected with appropriate power for the drive, or adapt the motor under parameter C599.