Faulty PAR2 Transfer

What does Pr2 mean?

An error occurred during the transfer of parameter set 2 (PAR2) via the operating module, indicating that PAR2 is defective or corrupted. This means the secondary or alternative operating configuration of the drive is unreliable. The drive should not be enabled until this is resolved, as it may operate incorrectly or unsafely.

Complete Troubleshooting Guide

1. 1

   Repeat the data transfer for PAR2 from the operating module to the drive.

2. 2

   If the transfer fails again, load the factory default settings for PAR2 before attempting to enable the controller.

3. 3

   If the issue persists, consider replacing the operating module or troubleshooting the communication link.