Output Filter Choke Overtemperature

Hva betyr FF82 ?

The output filter choke of the drive is experiencing excessive temperature. This supervision is active in step-up drives and points to inadequate cooling or excessive current through the choke, which can lead to overheating and potential damage to the filter components, impacting drive output quality.

• Blocked ventilation or cooling fan failure for the output filter choke assembly.
• Continuous operation at motor current exceeding the choke's rated current capacity (e.g., motor current r0027 consistently > rated current).
• Harmonic distortion in the output current caused by non-linear loads or incorrect motor parameters.
• High ambient temperature in the drive cabinet causing overall component overheating.
• Internal short or winding degradation within the output filter choke.

Klikk på steg for å spore fremgangen.

1. 1

   Inspect the output filter choke for dust accumulation or debris blocking cooling fins. Clean any obstructions.

2. 2

   Verify the operation of any dedicated cooling fans for the output filter choke by checking for airflow and fan rotation.

3. 3

   Monitor the actual motor current (e.g., r0027) during operation to ensure it does not consistently exceed the choke's current rating.

4. 4

   Measure the ambient temperature within the control cabinet near the choke; ensure it is within the specified operating range (e.g., <40°C).

5. 5

   Check for correct motor parameters (e.g., P03-01 to P03-08) configured in the drive, as incorrect values can lead to improper motor control and choke stress.