Main Circuit Overload / IPM Overheat

Hva betyr SP0009 ?

The main circuit of the spindle amplifier is overloaded, or the IPM (Intelligent Power Module) has overheated. This indicates excessive current draw or insufficient cooling for the power module.

• Motor is drawing excessive current due to overload or fault.
• IPM (Intelligent Power Module) failure within the amplifier.
• Inadequate heatsink cooling for the IPM.
• Short circuit in motor phases or cabling.
• Incorrect motor saturation or flux parameters configured.

Klikk på steg for å spore fremgangen.

1. 1

   Measure motor winding resistance (U, V, W) to ground and between phases.

2. 2

   Check the heatsink temperature of the IPM module on the amplifier.

3. 3

   Verify that parameter P1-01 (motor current rating) is set correctly.

4. 4

   Inspect the motor power cables for insulation damage.

5. 5

   Run a low-speed motor test to assess current draw.