Spindle/Motor Number Mismatch (15i)

Hva betyr SP0221 ?

The correspondence between spindle numbers and motor numbers for Series 15i is incorrect. This can lead to the wrong motor being controlled or general system malfunction.

• The assigned motor number for a given spindle does not match the hardware connected.
• Incorrect parameter setting for spindle-to-motor mapping.
• A physical motor has been replaced without updating the corresponding spindle configuration.
• The system is attempting to control a spindle with an unassigned or incorrect motor.

Klikk på steg for å spore fremgangen.

1. 1

   Verify parameter P1-05 (Motor Number) for the affected spindle is correctly set.

2. 2

   Confirm the physical motor's identification plate matches the configured motor number.

3. 3

   Physically trace the motor cable to ensure it connects to the expected drive.

4. 4

   Reset the spindle configuration and re-assign motor numbers.