DSP error in axis %.2s

Hva betyr 2187 F010 ?

An error has occurred in the Digital Signal Processor (DSP) within the power stage of the displayed axis. This indicates a critical fault in the axis drive's control electronics.

• Error in the power stage of the displayed axis.

Klikk på steg for å spore fremgangen.

1. 1

   Power cycle the NC control and the affected axis drive to clear any transient errors and reset the system.

2. 2

   Inspect the power wiring and feedback connections between the drive, motor, and NC control for the specified axis for any damage, loose terminals, or poor shielding.

3. 3

   Check for any external mechanical issues, such as binding or collisions, that might have caused an overload condition in the power stage.

4. 4

   Verify the motor encoder feedback and its cabling, as incorrect or intermittent feedback can lead to power stage instability.

5. 5

   If the error persists after these checks, consider documenting all relevant machine and program data for review by a service agency.