Laser program could not be activated: Please check errors on laser console

Hva betyr NotProgramAc- tive ?

The laser program failed to activate. This may be due to a required signal not being generated or detected by the laser system, or an internal error in the laser controller.

• The laser program could not be activated.
• An error on the laser console prevents program activation.
• Laser safety interlocks are not satisfied.
• Required laser parameters are not set correctly.
• Communication failure with the laser source.

Klikk på steg for å spore fremgangen.

1. 1

   Verify all required input signals to the laser controller are present and correctly detected (e.g., interlocks, ready signals).

2. 2

   Check the laser console for specific error messages or status indicators that provide more detail.