Startup

Hva betyr 09 ?

This fault indicates incorrect startup or parameter settings, potentially configured via MOVITOOLS® MotionStudio. The unit's initial configuration is not valid, preventing proper operation.

• Initial ramp-up speed too high for the motor/load.
• Motor or load inertia too high for startup parameters.
• Incorrect startup torque compensation.
• Parameter P1091 (startup) mode misconfiguration.
• Stalling during initial motor rotation.

Klikk på steg for å spore fremgangen.

1. 1

   Repeat the startup process, ensuring all parameter settings are correct.

2. 2

   Reset the fault by switching off the DC 24 V supply voltage.