Speed monitoring

Hva betyr 08 ?

The speed monitoring function has triggered, indicating that the load on the drive is too high for the current operating conditions. This error is typically active when DIP switch S2/4 is set to 'ON' or when additional function 13 is active.

• Excessive load on the drive system exceeding the set speed limits

Klikk på steg for å spore fremgangen.

1. 1

   Reduce the load on the drive

2. 2

   Reset the error by switching off the DC 24 V supply voltage

3. 3

   Reset the error via the control system or dedicated reset function