Error in outgoing MFI interface (OUT1)

What does 0C8A mean?

The outgoing MFI interface (OUT1) was activated even though no station is connected or was configured in the master. This indicates a mismatch between the physical setup and the INTERBUS master configuration.

• No station physically connected to the outgoing interface OUT1.
• Outgoing interface OUT1 not configured in the INTERBUS master.
• Incorrect setting of DIP switch 6 (NEXT/END) on the MFI.

Click steps to track your progress.

1. 1

   Check the setting of DIP switch 6 (NEXT/END) on the MFI. If the MFI is the last station in the bus segment, this switch must be set to END.

2. 2

   Verify that a station is physically connected to OUT1 if it is enabled.

3. 3

   Check the INTERBUS master configuration to ensure OUT1 is correctly configured for connected stations.