Drive: Motor temperature sensor fault
Siemens · DCM
What does F07016 mean?
An error was detected during the evaluation of the motor temperature sensor (configured in p0601). Possible causes include a wire breakage (KTY: R > 2120 Ohm), the sensor not being connected, or a measured resistance that is too low due to a short circuit (PTC: R < 20 Ohm, KTY: R < 50 Ohm). If alarm A07015 was present, this fault was output after the timer p0607 expired, indicating a prolonged issue.
Complete Troubleshooting Guide
- 1
Ensure that the motor temperature sensor is connected correctly and securely to the drive's input terminals.
- 2
Check the parameterization of the motor temperature sensor type (p0601) to ensure it matches the actual sensor installed.
- 3
For induction motors, if temperature monitoring is not critical or desired for the application, deactivate the temperature sensor fault by setting parameter p0607 = 0.