1332

The PLC program was set in STOP state by the operator.

Bosch Rexroth · Motion Control

What does 1332 mean?

The PLC program has been intentionally set into the STOP state by an operator using the programming device. This is a PLC error, requiring manual intervention to resume operation.

Common Causes

  • Operator manually set the PLC program to STOP using the programming device.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Switch the PLC program to 'RUN' state using the programming device monitor.

Browse all codes in this manual (60)
Verified technical data. Last updated: March 2026

Related Faults

1287Error during generating the stack for the IdleTask.1302SERCOS state class 1: Unspecified error %s-axis.1288SERCOS state class 1: Overload cut-off %s-axis.
Source: Bosch Rexroth Motion Control
Open Manual (Page 82)Search more codes in this manual