1340

Data error in %s (%s-axis).

Bosch Rexroth · Motion Control

What does 1340 mean?

The drive does not accept the identification number provided in the SCS-file for the specified axis. This is a servo loop or drive fault, indicating a mismatch between the configured identification number and what the drive expects or supports.

Common Causes

  • Drive does not accept the identification number from the SCS-file for the %s-axis.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Compare the identification number value specified in the SCS-file with the drive's minimum/maximum acceptable range.

Browse all codes in this manual (60)
Verified technical data. Last updated: March 2026

Related Faults

1291SERCOS state class 1: Cooling fault cut-off %s-axis.1290SERCOS state class 1: Motor overtemperature cut-off %s-axis.1295SERCOS state class 1: Overcurrent fault %s-axis.
Source: Bosch Rexroth Motion Control
Open Manual (Page 82)Search more codes in this manual