Encoder Communications Disconnection Error

What does 08080000 hex mean?

A disconnection was detected because communications between the encoder and the Servo Drive were stopped more frequently than the specified value. This signifies unreliable or interrupted communication with the encoder.

• The encoder is not wired correctly.

Click steps to track your progress.

1. 1

   Inspect all encoder cable connections at both the encoder and the servo drive for tightness, corrosion, and proper seating.

2. 2

   Visually inspect the entire length of the encoder cable for physical damage, cuts, crimps, or signs of wear.

3. 3

   Verify the supply voltage to the servo drive and any auxiliary encoder power supplies meets the manufacturer's specifications.

4. 4

   Check for proper grounding of the servo system and shielding integrity of the encoder cable to prevent electromagnetic interference (EMI).

5. 5

   Verify the servo drive's encoder configuration parameters (e.g., encoder type, resolution, communication settings) match the physical encoder installed.