PARAMETER SETUP FAULT

What does 915 mean?

One of the critical parameters, specifically Rated Volts (#7 or #9) or Rated Current (#3 or #50), has been set outside the acceptable operating range for the chassis hardware. A DSD power down is required.

• An incorrect value entered for parameter #7 (Rated Armature Voltage) or #9 (Rated Line Voltage).
• An incorrect value entered for parameter #3 (Rated Armature Current) or #50 (Rated Field Current).

Click steps to track your progress.

1. 1

   Enter the correct parameter data for #7 (Rated Armature Voltage), #9 (Rated Line Voltage), #3 (Rated Armature Current), or #50 (Rated Field Current) within the specified hardware limits.

2. 2

   Save the corrected parameters to NVRAM.

3. 3

   Perform a DSD power down, then reset and restart the drive.